Skip to ContentSkip to Navigation
About us Latest news News News articles

More efficient molecular motor widens potential applications

01 May 2024

Light-driven molecular motors were first developed nearly 25 years ago at the University of Groningen. This resulted in a shared Nobel Prize for Chemistry for Professor Ben Feringa in 2016. However, making these motors do actual work proved to be a challenge. A new paper published in Nature Chemistry on 26 April describes a combination of improvements that brings real-life applications closer.

FSE Science Newsroom | René Fransen

First author Jinyu Sheng, now a postdoctoral researcher at the Institute of Science and Technology Austria (ISTA), adapted a ‘first generation’ light-driven molecular motor during his PhD studies in the Feringa laboratory. His main focus was to increase the efficiency of the motor molecule. ‘It is very fast, but only 2% of the photons that the molecule absorbs drive the rotary movement.’

decorative image
First author Jinyu Sheng | Photo University of Groningen

Difficult

This poor efficiency can get in the way of real-life applications. ‘Besides, increased efficiency would give us better control of the motion,’ adds Sheng. The rotary motion of Feringa’s molecular motor takes place in four steps: two of them are photochemical, while two are temperature-driven. The latter are unidirectional, but the photochemical steps cause an isomerization of the molecule that is usually reversible.

Sheng set out to improve the percentage of absorbed photons that drive rotary motion. ‘It is very difficult to predict how this can be done and, in the end, we accidentally discovered a method that worked.’ Sheng added an aldehyde functional group to the motor molecule, as a first step in further transformation. ‘However, I decided to test the motor function of this intermediate version and found it to be very efficient in a way that we had never seen before.’

For this, he cooperated with the Molecular Photonics group at the University of Amsterdam’s Van ‘t Hoff Institute for Molecular Sciences. Using advanced laser spectroscopy and quantum chemical calculations the electronic decay pathways were mapped, providing detailed insight in the working of the molecular motor.

decorative image
Optical image of the improved motor molecule in a liquid crystal cell. The RUG letters were generated by exposure to UV light through a mask, which moves the molecule into a position that confers a green color to the liquid crystal. The masked area shows no change of color, although the right-hand sign is green because of irregularities in the cell thickness. Image: University of Groningen

Rotation cycle

Furthermore, it became clear that the adaption indeed gave Sheng better control of the molecule’s rotary movement. As mentioned before, the molecular motor rotates in four discrete steps. Sheng: ‘Previously, if we irradiated a batch of motors with light, we would get a mixture of motors at different stages of the rotation cycle. After the modification, it was possible to synchronize all motors and control them at each stage.’

This opens up all kinds of possibilities. For example, the motors could be used as a chiral dopant in liquid crystals, where the different positions would create different reflection colours. In the Nature Chemistry paper, Sheng and his colleagues present an example of this. Other applications could, for example, be the control of molecular self-assembly. (story continues below the illustration)

decorative image
Depiction of the structural changes during 4-step unidirectional isomerization of 1st generation aldehyde motor with key features above the reaction arrows. Starting from top left, UV light induces photoisomerization to reach the top-right state with more than 95 percent efficiency. This top-right state transforms by a unidirectional thermal ‘helix inversion’ step (THI) to the version depicted  bottom right, completing a half cycle of the rotation. Subsequent UV irradiation will lead to the formation of state depicted bottom left (with over 80 percent efficiency), which can transform to the initial state of the motor by another unidirectional THI step, finishing the 360o rotation cycle. | Image University of Groningen

Applications

The addition of an aldehyde group to the motor molecule also has another interesting effect: it shifts the absorption of light to a longer wavelength. Since longer wavelengths penetrate further into living tissue or bulk material, this means that the motors could work much more efficiently in medical applications and materials science because more light will reach the motor molecule, while this will also use the photons more efficiently.

‘A number of our colleagues are now working with us on this new molecular motor for different applications,’ says Sheng. He expects more papers on this topic in the near future. Meanwhile, there is another challenge for the Feringa lab: ‘The molecular motor is now more efficient but we don’t exactly know why the modification causes this effect. We are currently working on it!’

Reference: Jinyu Sheng et al., Formylation boosts the performance of light-driven overcrowded alkene-derived rotary molecular motors , Nature Chemistry, 26 April 2024t

Last modified:06 June 2024 4.28 p.m.
View this page in: Nederlands

More news

  • 10 June 2024

    Swarming around a skyscraper

    Every two weeks, UG Makers puts the spotlight on a researcher who has created something tangible, ranging from homemade measuring equipment for academic research to small or larger products that can change our daily lives. That is how UG...

  • 24 May 2024

    Lustrum 410 in pictures

    Lustrum 410 in pictures: A photo report of the lustrum 2024

  • 21 May 2024

    Results of 2024 University elections

    The votes have been counted and the results of the University elections are in!